Thursday, 09 September 2010
Calculations27/06/2008 | Administrator

Anchor Forces on straight pipe anchored at both ends   In this article we will go through a simple calculation to determine the anchor forces on a pipe anchored at both ends.
 
P [ ... ]


+ Full Story
Other Articles

Valves

Minifrontpage user1

Valve Terminology
14/07/2008 | Administrator

This article describes some of the commonly used valve terminology.


+ Full Story
Other Articles

Materials

Minifrontpage user2

CPVC piping
07/06/2008 | Administrator

CPVC Piping CPVC piping is commonly employed in the chemical industry. CPVC resin is created by post-chlorination of PVC polymer. CPVC has excellent chemical resistance to wide range of corrosive fl [ ... ]


+ Full Story
Other Articles

Specials

Minifrontpage user4

Flange Insulation kits
07/06/2008 | Administrator

Flange Insulation Kit The growth of long distance underground pipeline systems increases the need for special protective measures against external corrosion. The aggressive nature of the ground,  [ ... ]


+ Full Story
Other Articles

Stress

Minifrontpage user5

Stress Analysis - Anchor Forces
27/06/2008 | Administrator

Anchor Forces on straight pipe anchored at both ends   In this article we will go through a simple calculation to determine the anchor forces on a pipe anchored at both ends.
 
P [ ... ]


+ Full Story
Other Articles
 
We have 7 guests online
Members : 1366
Content : 108
Web Links : 2
Nickel piping PDF Print E-mail
Written by Administrator   
Sunday, 08 June 2008 07:21

Nickel Piping

Nickel is highly resistant to various reducing chemicals and is unexcelled in resistance to caustic alkalies.

Nickel 200 (UNS N02200/W.Nr. 2.4060 & 2.4066) is commercially pure (99.6%) wrought nickel.
Nickel 200 is normally limited to service at temperatures below 600°F (315°C). At higher temperatures Nickel 200 products can suffer from graphitization which can result in severely compromised properties. For service above 600°F (315°C), Nickel 201 is preferred.

Nickel, (UNS N02200), from a corrosion standpoint, is the best material for caustic piping up to 600°F. Nickel is used extensively to convey higher temperature and product grade caustic where low metals pickup (particularly iron), is a requirement.

To view rest of this section, please login or register..
Last Updated ( Saturday, 03 January 2009 20:45 )