Piping Materials Q&A
Piping Materials Discussion Forum
Impact Test Requirement
API 5L Diameter Tolerances
BW End side & Flange End Side of Ball Valve for code break between B31.4,8 & B31.3
Spectacle Blind Size Larger that 24" dimension
What is the difference between a heat and lot?
Can LTCS be used for temperatures below -45 degrees C?
What is the risk to stainless steel pipework in presence of galvanized steel?
What are the upper and lower design temperature limits for UPVC piping?
What is the difference between ASTM A106 Grade A, B and C?
What is meant by Dual Certified Pipes?
What is Single Random Length and Double Random Length of Pipe?
Popular Topics
Popular Questions
-
What is Single Random Length and Double Random Length of Pipe?
Steel pipes are produced in two lengths: single random (SRL) and double random (DRL). API…
-
What is the difference between ASTM A106 Grade A, B and C?
Grade A has lower carbon content, is a softer steel and easier to bend. Grade…
-
What is meant by Dual Certified Pipes?
It has been increasingly common for manufacturers to supply dual certified pipes. For example dual…
-
Can LTCS be used for temperatures below -45 degrees C?
Low temperature carbon steel may be used below -45°C provided figures 323.2.A and 323.2.B including…
-
Spectacle Blind Size Larger that 24" dimension
How can I refer Spectacle Blind Size Larger that 24" dimension from? B16.48 is just…
-
What is the difference between a heat and lot?
Heat refers to the primary melt of a metal. The heat determines the chemistry unless…
-
Impact Test Requirement
Pipe size 4". the provision in API 5L has shown that Impact test is not…
-
BW End side & Flange End Side of Ball Valve for code break between B31.4,8 & B31.3
My current project requirement for ball valve code code break between B31.4,8 & B31.3. B31.4,8…
-
What are the upper and lower design temperature limits for UPVC piping?
The upper design limit temperatue for UPVC piping is 60°C and the lower design limit…
-
What is the risk to stainless steel pipework in presence of galvanized steel?
Liquid Metal Embrittlement is the loss of ductility in ductile metals when subjected to stress…